Rotary welding positioner welding turntable 10kg welding positioner turntable tilt table for ring we

٣٬٠٤٩٫٠٠ ر.س.‏
+ ٥٢٫٩٩ ر.س.‏ الشحن

Rotary welding positioner welding turntable 10kg welding positioner turntable tilt table for ring we

  • العلامة التجارية: Unbranded

Rotary welding positioner welding turntable 10kg welding positioner turntable tilt table for ring we

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ٤٬٦٩٩٫٠٠ ر.س.‏
السعر: ٣٬٠٤٩٫٠٠ ر.س.‏
أنت توفر: ١٬٦٥٠٫٠٠ ر.س.‏ (35%)
البائع:
٣٬٠٤٩٫٠٠ ر.س.‏
+ ٥٢٫٩٩ ر.س.‏ الشحن

في المخزون

نقبل وسائل الدفع الآتية

الوصف

Rotary Welding Positioner Welding Turntable 10Kg Welding Positioner Turntable Tilt Table for Ring Welding with 65 Chuck Specification: Name: 10 kg positioner Model: BWJ-10 Load (horizontal/vertical): 10/5KG Speed: 2-20r/M (1-10rr/M) Input voltage: AV220/110V 50-60HZ Table diameter/thickness: 180mm/9mm Conductivity of copper rod ground wire: 80A (100% duty cycle) Applicable chuck: XH65mm BWJ-10 (10 kg positioner) mainly consists of five parts: workbench, turning Mechanism, control box, motor and reducer, frame. artifact is Fixed on the workbench, it can be rotated and tilted, so that the welding seam is at the most Favorable welding position for improved weld quality and yield efficiency and reduce the labor intensity of workers. feature: 1. The thickness of the plate is 9mm, and the rotation is smooth; 2. Conductive copper brush for ground wire of special welding machine; 3. High-quality DC motor is used to transmit torque to the rotation The workbench is driven by gear meshing, and the workbench runs smoothly. The welding speed can be adjusted steplessly, and the adjustment range is large. High adjustment accuracy. 4. Small size, precise structure, convenient operation and flexible use. 5. Fixtures and fixtures use simple mechanical connection methods Workbench with high positioning accuracy. 6. The foot switch is used to control the rotation of the workbench, namely Easy to control rotation. 7. Especially suitable for welding flanges, steel pipes, rings, circles, etc. Parts under 10 kg. 8. The standard speed is 2-20 rpm, 1-10 rpm Every minute can also be selected according to actual needs. notes: The conductive carbon brush current cannot exceed 70A during welding This is only suitable for welding small parts of 20-30mm Configure the chuck with a maximum outer diameter of 60mm The welding length is generally within 200mm NOTE: Torch stand not included.
  • هوية Fruugo: 366844702-794271979
  • EAN: 686331545009

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

ملصقات سلامة المنتج

CE Mark
تحذيرات السلامة: Replacement must be performed with the assistance of a professional
مكونات: 75% plastic and 25% metal

التسليم والرد

يُرسل خلال ١٢ أيام

  • STANDARD: ٥٢٫٩٩ ر.س.‏ - التسليم بين الأربعاء 26 نوفمبر 2025 – الأربعاء 03 ديسمبر 2025

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة