Shop name:Chong Qing Shuo Yue Ke Ji You Xian Gong Si 1. The inner diameter of the handle without the throttle core is larger, which is suitable for models where the throttle core cannot be disassembled. 2. The product adopts a horizontally wound structure of heating wires, which is much more complex than other structures on the market, but it receives even force when rotating and has excellent comfort. The heating power and electricity consumption are only half of similar products, and the heating effect is better. It is a truly high-efficiency and energy-saving electric heating handle. 3. The handle is made of high-temperature-resistant nitrile rubber and is molded in . It has an ultra-thin special switch for the electric heating handle and a removable cover that can be sealed or opened for free switching. 4. Advanced electronic temperature control system consumes no power and can better protect the battery. The high-quality handle switch is more exquisite than the old handlebar. 5. The product wires are sheathed with silicone and can be used in extremely low environments. Silicone has particularly good aging resistance and will not age with time (older wires do not have silicone protective ) Input working voltage:12V Handle type:Sealing or opening electric heating handle Installation Notes: [1] First remove the left hand handle of the car [2] Wet the inner hole of the left hand handle with soapy water. The twisting range should not be too during installation. There should be enough room for rotation of the power cord of the handle. [3] When installing the balance iron on the left hand handle, adjust the position of the balance iron to be slightly separated from the handle. Do not squeeze the handle when tightening the screw. If the left hand handle slides on the steel pipe during use, remove the balance iron and point itfrom of the handle. Fix with a few of 502 glue [4] On the throttle, you only need to remove the soft rubber. After removing the soft rubber, install the right handlebar. The oil twister does not need to be removed. [5] Wiring , the red wire is connected to the positive pole of the power supply, and the black wire is connected to the negative pole of the power supply (Note:Do not connect reversely) Due to different batches, there may be differences in product appearance, color, and printed text, which will not affect the use. Colour:Black Material:Plastic Size:Handle diameter:22mm; Left hand handle: 125x35MM; handle: 127x35mm Package Contents: 1set x Motorcycle Hand Heated Grips Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.