1、EASY TO RETURN ORIGINAL SHAPE: The first layer is spring steel, which will not warp even if bent, but will return to original shape. Because of ability to elastically deform, the product is difficult for humans to permanently deform 2、BRUSHED FOR NO DEMOULDING: The surface is brushed to increase the contact surface with the model to ensure no demoulding during printing 3、STRONG MAGNETISM WITHOUT FALLING: Magnetic base with extra thick magnets and strong magnetism to ensure that large models can be printed without platform falling off 4、CONVENIENT REMOVING: Combined with magnetic steel, the mold can be easily taken by gently bending the steel plate, and the handle design is convenient for removing the printing surface 5、SIMPLE OF USE: Easy to assemble and operate. Just clean your build plate well, let it dry, you need to attach the magnetic cover to the build plate and put the flexible steel plate on it. You have to make a 2.5mm spacer. This needs to be placed under the arm that triggers the Z stop 6、STRONG ADHESION: The magnetic base provides strong magnetism to ensure a perfect fit with the steel plate. The adhesive has strong viscosity, good adhesion at low temperature, and not easy to fall off after bonding with platform 7、EASY REMOVING: The traditional DLP light curing printer platform must be removed with tools such as a scraper, while this resin flexible board can be removed by bending. Realize easier removal of printed models from resin build surfaces Item Type: Magnetic Spring Steel Plate Platform Size: Approx. 202 x 128mm / 7.95 x 5.04in Material: Spring steel surface, magnetic rubber plate, resin Applicable Models: For SLA and DLP 3D printer Steel Plate Thickness: Approx. 0.5mm / 0.02in Magnetic Plate Thickness: Approx. 1.5mm / 0.06in 1 x Spring Steel Surface 1 x Magnetic Rubber Sheet