Features 1、GOOD SEALING: The piston seal adopts shaped bi directional sealing structure, which makes the slide cylinder sealing good and more practical. 2、ALUMINUM ALLOY SHELL: The cylinder adopts aluminum alloy CNC programming accuracy machining, the thread is clear and easy to install, and the surface is hard oxidized with strong corrosion resistance. 3、EASY INSTALLATION: Built in magnetic ring can be installed magnetic switch, sliding installation is convenient and fast, the installation surface all use steel wire buckle, not easy to slip teeth, steel guide, more convenient installation. 4、SURFACE COATING: The surface of the piston rod is treated with coating, and the thickness of the piston rod surface coating is up to 20μm or more to prevent corrosion and rust. 5、WIDE APPLICATION: The cylinder can be used in compressed air equipment and pipelines, such as air compressors, storage tanks, dryers, accuracy filters, air pressure pipelines, etc. Specification Item Type: Air Pneumatic Parallel Gripper Material: Aluminum alloy, stainless steel Cylinder Inner Diameter: Approx. 6mm / 0.24in Piston Rod Outer Diameter: Approx. 3mm / 0.12in Action Form: Double action type Working Medium: Air Operating Pressure Range: ≤1.0MPa Guaranteed Pressure Resistance: 1.2MPa (175psi) (12.0bar) Operating Speed Range mm/s: 50-500 Inlet and Outlet Pipe Diameter: M5x0.8 Action Form Compression Area(mm²) 0.2MPa 0.3MPa 0.4MPa 0.5MPa 0.6MPa 0.7MPa Double Action Pull Side 42 8 13 17 21 25 29 Double Action Press Side 57 11 17 23 29 34 40 Package List 1 x Air Pneumatic Parallel Gripper