Product category toothbrush holder ABS material Suction cup hanger Quantity is 1 piece A color family of four has a juicer, a family of three has a juicer - citrus, two have a juicer, a family of four, a family of three, two families, a juicer Citrus-gray, single-paste-green juicer (Optional) Contents : depends on the first main photo Detailed measurement: Two cups + toothpaste dispenser size 33 * 11 * 14cm, gross weight 550g Three cups + toothpaste dispenser size 39 * 11 * 14cm, gross weight 750g Four cups + toothpaste dispenser size 44 * 11 * 14cm, gross weight 890g The size of the toothpaste dispenser is 11.5 * 7.1 * 6.2cm, and the gross weight is 125 grams. Two cups are 23 * 11 * 14cm long, gross weight 441g Three cups size 33 * 11 * 14cm, gross weight 604g How to use: Place a sturdy slot management tool Tear off the sturdy protective film Align the position and stick it on the wall Remove the reinforcement bar from the main body. Press the patch firmly Just install the host After two hours put everything awayAfter installation, you can make sure to use it Installation instructions When assembly, it must be installed on a hard and smooth wall (wall tile, glass, etc.); * White gray latex paint walls or walls are not suitable for this product; Wipe down the wall before installation to avoid dust and water spots. * During the installation process, please do not install it on the joints of the wall tiles Store Tips: 1. The size is manually measured, please allow the error (1-3cm). 2. Due to the different monitor pixels, there may be some color difference, please refer to the actual product.