Sturdy and durable: The foldable shelf bracket is made of high quality stainless steel with a smooth surface to prevent scratches, has good corrosion and rust resistance, and the triangular shape is the strongest structure. more stable of the wall bracket. Space saving: The foldable shelf bracket is attached to the wall at a 90 degree angle and has only one mounting surface. It takes up very little space. Simply press the release arm and the stand can be folded, which can keep your room clean and tidy. Widely Used: The folding stand is very suitable for many DIY jobs and is a extension of shops, workshops, boats, RVs, backyards, caravans, bedrooms, kitchens, balconies, bathrooms and other places. They can also be used for bookshelves, kitchen shelves and exhibition stands. Easy to install: The foldable hinge bracket is easy to install and fold, so you can build a foldable shelf bracket or a small wall-mounted folding table for your home or garage. You just need to make sure the two folding brackets are parallel to each other and perpendicular to the wall. What You Get: 2pcs x Folding Shelf Bracket. If you have any questions about the products, you can always contact us and we will provide you with the best customer service. Specification: Material: stainless steel Installation method: screw fixing Color: silver Dimensions: 20 x 7.8 x 2cm / 8 x 3 x 0.8inch (Length x Height x Width) Weight (pc): 200g, Weight of maximum load: 75 kg Package Contents: 2 x Heavy Duty Folding Stand, 8 x Mounting Screws Note: 1. The product does not contain a wooden board. 2. The product should be installed horizontally and tightly to prevent loosening. 3. During use, the maximum load capacity, the thickness of the wall and the thickness of the plate must be taken into account so that the console is not overloaded and does not damage the wall or the plate. 4. The width of the board should be no more than 5 cm longer than the stainless steel support. 5. The number of foldable brackets can be increased according to the length of the panel, which can increase the load capacity. Method installation: 1. Measure the position of the support on the map 2. Reserve 1 mm (0.04 inch) for the plate at the end of the wall (near the wall). 3. Mark the position of the awl on the board. 4. Secure the bracket to the card using short screws. 5. Use a spirit level to ensure it is parallel and mark the appropriate position on the wall. 6. Use a drill to drill a hole in the mark. 7. Insert the expansion tube into the hole. 8. Secure the bracket with long screws. 9. Lift the spring button and press it to fold it.