Car Body Putty Scratch Filler Painting Pen Assistant Smooth Vehicle Repair ToolSpecifications:This car body putty scratch filer kit is used for filling in the pit with a depth of less than 2 mm on the paint surface, deep scratch or paint surface spalling.It includes a scratch filler, a special scraper, and the sandpaper.The scratch filler is quick to dry and easy to use.Item Name: Car Scratch FillerMaterial: PuttyNet Weight: 10gFeatures: Portable, Easy to Use, Fast DryingSize: 8cm x 2cm/3.15"x 0.79"(Approx.)Notifications:1.Please use it in a dry and well-ventilated place.2.If the scratch filler is smeared too thick, its interior cannot completely harden, so please ensure its applying thickness is about 2mm.3. Its optimum operating temperature is 10 to 30 degrees Celsius. If the temperature is too high or too low, it will affect its drying time. In addition, it may not dry when using it below 0 degree Celsius.Usage:1. Foundation treatmentFirstly, grind the sunken or scratched part with 800# sandpaper and water (the grinding area must be slightly larger than the sunken or scratched part), and then clean the dirt and grease and dry it in the air.2. Filling soil for landfillPlease squeeze out appropriate amount of earth filling according to the need, and fill it with waste hard cards, which should be slightly higher than the surrounding area.3. Filling and grindingAfter complete hardening (about 1-2 hours at room temperature), grind it with 800# sandpaper. If there are bubbles or small pits, please repeat step 2-3.4. Finishing grindingGrind the repair with sandpaper and water.5. Finish coatAfter completion, the paint repair products can be selected for topcoat repair.Notes:Due to the light and screen setting difference, the item"'"s color may be slightly different from the pictures.Please allow slight dimension difference due to different manual measurement.Package Includes:1 x Car Scratch Filler1 x Scraper1 x 800# Sandpaper