Feature: 1. Long Handle: This angle grinder stand adopts long handle which allows you to control cutting power easily. 2. Cast Iron Base: This fixed grinder holder adopts cast iron base, thickened and reinforced, stable and durable to use. 3. Multi Angle Cutting: This angle grinder holder supports multi angle cutting, the diagonal cutting is up to 45 degrees. 4. High Strength Spring: This angle cutter bracket is designed with spring in high strength, easy to operate with pulling and releasing. 5. Wide Application: This angle grinder support is designed for 115mm or 125mm angle grinder, suitable for cutting wood and metal. Specification: Item Type: Angle Grinder Stand Material: Cast Iron Application: Designed for 115mm or 125mm Angle Grinder, Suitable for Cutting Wood and Metal. Product Size: Approx. 354 x 245 x 197mm / 13.9 x 9.6 x 7.8in ( Manual Measurement, Slight Error May Exist ). Package List: 1 x Base1 x Baffle1 x Handle1 x Plastic Baffle2 x Fixing Board1 x Wrench2 x Hex Wrench7 x Nut6 x Screw6 x Washer1 x Spring5 x Accessory1 x User Manual Note: 1. The support is an accessory of Angle grinder, which is used to convert the grinder into a cutting machine.2. For your safety, please read user manual. Understand and follow all instructions for mounts and grinders before use.3. The support should be fixed on a firm horizontal surface.4. Ensure that the working area is free of debris and obstacles and well lit.5. Make sure you're in a comfortable position. Hold a balanced position and maintain a stable base before starting to cut.6. Cutting creates sparks. Make sure all flammable materials are away from the work area before starting work.7. Sparks from grinders can damage paint, glass and other surfaces.8. Do not wear nylon or polyester clothing when cutting, please wear work clothes with appropriate fire resistance.9. Don't wear loose clothes, jewelry when using a grinder.10. Keep bystanders and children at a safe distance when using this tool.11. Never use a grinder without protection.12. The plastic cover mounted on the support is for spark control only and is not designed to prevent injury caused by the possible breaking of the cutting wheel parts. Supports should only be used with grinders fitted with the manufacturer's original metal cover.13. When assembling the support, ensure that the metal cover on the grinder and the plastic cover on the support are positioned between the user and the cutting wheel, so that debris will not hit the user if the cutting wheel breaks.