Condition:100% Brand New Item Type: Adult Diaper Material: 100% polyester Waist Circumference: Approx. 90-150cm/35.4-59.1in Crotch Height: Approx. 40 cm/15.7in Instructions: First step: Unfold the diaper, put the original nano pad or other diaper into the pocket and spread it flat. Second step: The user adopts a side lying position, spreads the diaper with the diaper/diaper installed on the bed behind the user and near the buttocks. When the user turns over and lies down, the diaper is placed under the user's buttocks. Third step: Pull the front waist of the diaper to the user's belly button, and buckle the hook and loop fastener on the left and right of the back waist (note that you should first buckle the left side hook and loop fastener of the back waist to the front waist and then buckle the right side hook and loop fastener of the back waist to the left hook and loop fastener) , According to the waist size of the user, the elasticity of the hook and loop fastener can be adjusted appropriately. Washing guide: Wash before use, warm or cold water not higher than 60. Do not soak the diapers for a long time before washing, either by hand or machine washing. Please do not use strong detergents and softeners. The diaper is made of quick-drying fabric, which will dry quickly when placed in a ventilated place. It is not suitable for rapid drying at high temperature (except changing pads). Like ordinary clothes, no special high temperature cleaning is required (high temperature will destroy the adhesion of the waterproof layer and cause delamination). Package List 1 x Adult Diaper 1. Diapers are used to fix nano urine pads or paper diapers. They have no water absorption function but only waterproof function. They need to be used with water absorption accessories.2. The back end of the diaper or diaper should be placed in the lining cloth and not exposed, so that the lining cloth can quickly penetrate urine and keep it dry.3. The diaper leg stretch belt must be close to the user's leg, otherwise the user will turn over or move, which will cause urine to leak sideways and wet the clothes or sheets.4. It is necessary to change the changing pad or diaper in time, and the change interval should consider the water absorption of the accessory and the urine volume of the user.5. The pants need to be used with a changing pad or other absorbent accessories. The price does not include a changing pad. You can buy other absorbent accessories or even use an old towel to make your own changing pad. The stronger the absorbent, the better. 1Threelayer design structure, the inner surface of the outer layer (face cloth) has a composite elastic waterproof TPU film, which has high elasticity and tensile strength and good flexibility. 2It can be washed many times without deformation, waterproof and breathable, and prevent urine leakage. 3The inner layer (lining) is a napped cloth, which has good water absorption. The urine will quickly be absorbed through the inner cloth to the (middle layer) changing pad. The fabric that touches the adult skin only has a slightly wet feeling. 4The inner cloth has a back waist opening, and the absorbent pad can be placed inside. The pad will not come out during adult activities. The absorbent diaper can be taken out and washed and dried separately from the diaper, which greatly shortens the drying time. 5The tightness of on the legs can prevent side leakage of urine. 6There are multilevel adjustment buckles on the waist and front piece, which can easily adjust different sizes and greatly improve the service life.