TFT LCD Screen with Digitizer Full Assembly, Not Supporting Fingerprint Identification Before Installation Notes Tip 1: Test before installation When testing, do not remove any protective film or tags. Be aware of static electricity. Before attempting any repair, ensure you are grounded with an ESD (electrostatic discharge) strap to prevent damage to internal electronic components. Wear eye protection and handle glass components with care to avoid injury. Tip 2: Simulate testing Screen replacements are fragile. We strongly recommend testing before full installation. Simulate testing by partially disassembling the phone, connecting the motherboard, LCD or screen, and audio cable with the new replacement, then powering on to test functionality. If the test is successful, proceed with installation. If there is no display, immediately. Do not force installation if the screen does not work. We are not responsible for units that have been fully installed. Tip 3: Do not over-bend the cable Avoid bending the LCD cable beyond 90 degrees, as excessive bending may result in a black display. Product Information 1. LCD and touch screen digitizer assembly replacement 2. Replace damaged or non-functional screens 3. Restore your device’s appearance 4. Designed for proper fit and function 5. Each unit is tested and in good condition before shipment 6. Professional installation is highly recommended. We are not responsible for damage after installation 7. Note: Does not support fingerprint identification