Specification:Condition: 100% Brand NewItem Type: Glow Plug Removal Tool KitMaterial Material: SteelColor: As the picture shownBox Size: Approx. 28 x 22 x 5cm / 11 x 8.7 x 2 inch Function: To remove damaged glow plugs from cylinder cover, can be used to remove 8mm / 0.3 inch glow plugs and 10 mm/0.4 in. Instruction:1. The T-shaped nut sits on the center electrode.2. The detached electrode with a gun. All around Remove the center electrode. If the center electrode has not reduced the breaking point, unscrew and focus the electrode with the part (sleeve) by unscrewing.3. The sleeve is placed over the center electrode, fixed and unscrew the included drill.4. Mount the handle drill, drill right. This drill sleeve smear lightly and apply a thick layer of grease (grease).Attention: At low speeds, we drill and remove impurities several times during the drilling process. Drilling all the way.5. The thread drill cuts a length of inch thread into a 2 cm layer plug. It is especially important to remove impurities afterwards.6. The threaded adapter turns the extraction and screw the spark plug thread inch spark plug. Package List: 1 x Ratcheting T-Bar 1 x Bit Holding Adapter 1 x Extractor Outer Case 2 x Nut 1 x Star Socket Top Connection Removal Tool 1 x Wrench hex 3 x tap (1/4", M8, M10) 2 x high strength step drill (M8, M10) 2 x pilot drill (3.5mm) 2 x extractor adapter chuck 1 x plastic box