MKS Gen L V1.0 Control Board with Stepper Driver Board for 3D Printer

٣٨٩٫٠٠ ر.س.‏
+ ١٠٫٩٩ ر.س.‏ الشحن

MKS Gen L V1.0 Control Board with Stepper Driver Board for 3D Printer

  • العلامة التجارية: Unbranded

MKS Gen L V1.0 Control Board with Stepper Driver Board for 3D Printer

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ٥٤٩٫٠٠ ر.س.‏
السعر: ٣٨٩٫٠٠ ر.س.‏
أنت توفر: ١٦٠٫٠٠ ر.س.‏ (29%)
البائع:
٣٨٩٫٠٠ ر.س.‏
+ ١٠٫٩٩ ر.س.‏ الشحن

في المخزون

نقبل وسائل الدفع الآتية

الوصف

1、The control board supports A4988/8825/TMC2208/TMC2100 Dri. 2、The 2560 and ramps1.4 are assembled on one board, which solves the problem that the Ramps1.4 combination interface is cumbersome and easy to malfunction. 3、The user can replace the motor drive, support 4988 drive and 8825 drive, TMC2100 drive. 4、Reserve an external drive signal, which can be connected to a large drive to drive the 57 and 86 motors. 5、The use of high-quality MOSFET tube, better heat dissipation, to ensure long-term stability. 6、Using a dedicated power chip, support 12V-24V power input, to solve the problem of heat and power supply of Ramps voltage conversion chip. 7、The stable and reliable filter circuit greatly reduces the possibility of interference, and the most likely to avoid the phenomenon of crashes and runaways during the printing process. 8、Using CH340 serial chip, under the premise of ensuring stability and reliability, reduce costs, but also solve the problem of the previous 16U2 hard-to-install drive. 9、Using the open source firmware , the configuration and ramps1.4 are exactly the same, can directly replace Ramps1.4. 10、Can accept 24V input, the same system power can reduce the hot bed current to 1/4, effectively solve the hot bed MOS tube heating problem. 11、Can directly connect 2004LCD display and 12864LCD display, can support TFT28, TFT32 touch screen. 12、XYZ axle respectively use different color terminals to correspond to the motor and limit switch, convenient wiring. 13、User-friendly design, use different color terminals to distinguish the driving direction, reduce the probability of insertion and reverse, to prevent damage to the motherboard due to drive insertion.
  • هوية Fruugo: 355753343-773401566
  • EAN: 3373382444746

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

ملصقات سلامة المنتج

CE Mark
تحذيرات السلامة: Do not let your children touch this product alone to avoid swallowing or other injuries

التسليم والرد

يُرسل خلال ٢ أيام

  • STANDARD: ١٠٫٩٩ ر.س.‏ - التسليم بين الاثنين 03 نوفمبر 2025 – الثلاثاء 11 نوفمبر 2025

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • 91440500767340019K
  • Guangdong Guangwei Knitting Co., Ltd.
  • Chuangda Road, Huaguang Industrial Zone, Gurao Town, Chaoyang District, Shantou City
  • Shantou
  • CN
  • 515159
  • qianliwu1996@gmail.com
  • 13422264227

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • 819 698 275 00032
  • DISCOUNT INDUSTRY
  • 10 Rue Des Grands Pres, 60230 Chambly, Oise, France
  • OISE
  • FR
  • 60230
  • DISCOUNT-INDUSTRY@outlook.com
  • 0033 748562127