[Easy to Use]Different from the rail connector, does not require the tightening of screws, just insert the rail terminal into the 35mm iron and aluminum DIN rail, lift the orange clip, insert the wire into the hole until you feel the resistance, then lower the orange lever and complete the operation, saving 70% of the operation time. [Universal Compatibility] This is suitable for solid and flexible wire. Connect any combination of solid, stranded, and flexible copper wires. Suit for solid wire 0.08-4.0mm /28-12 AWG, flexible wire 0.5-2.5mm /20-14 AWG. It is widely used in distribution boxes, control cabinets, switchgear, complete sets of equipment, machinery etc. []Terminal blocks, brass metal body and the retardant insulating material modified nylon PA66 shell, it has a , no corrosion, anti-aging, 4KV and shock resistance, strong structure firmly locked to DIN rail. [Buy With ] junction , different wire managed separately, different diameter can be connect security, there are test hole in cage surface, electric test no need to remove tape. Colour: white + black Material: plastic + metal Package Contents: 20 * Terminal Blocks 2 * Connection Bar 2 * Digital Identification 20 * Screws 2 * End Stopper Bracket 1 * Transparent Storage Box Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.