Features Widely applicable: our pressure sensors are widely used for bed monitoring, sleep monitoring, smart shoes, smart switches and counters. More professional: the RP-C resistance pressure sensor is a flexible thin film sensor, whose resistance decreases with increasing pressure. NOTE: A single sensitive range pressure sensor corresponds to a variable resistor with two terminals whose resistance is controlled by pressure, and a switch with a certain threshold, where the threshold is determined by the setting of pressure and device parameters. EXCELLENT PERFORMANCE: The pressure sensor supports static/dynamic pressure measurement and has fast response speeds. Good quality: our pressure sensors are made of high-quality material, the sensor is durable and has a long service life. The flexible RP-C thin film pressure sensor is made of polyester film of excellent comprehensive mechanical properties, highly conductive material and pressure sensitive material in nano-scale; the top is a flexible film and above it a pressure-sensitive layer, the bottom is a flexible film and conductive circuit at the top. Both are glued with double-sided adhesive and the insulation sensitive area. When pressure is applied to the sensitive area, interrupted circuit at the bottom is connected to the top pressure-sensitive layer, and the output resistance of the port changes along with pressure. Specification: Model: RP-C10-ST Thickness: 0.4 mm. Trigger force 20g, triggered when resistance is less than 200kΩ by default Pressure measurement range: 20 g ~ 2 kg. Print action mode: static or dynamic (frequency within 10Hz) Non-tripping resistance: more than 10MΩ Activation time: less than 0.01 s. Operating temperature: -40 °C to +85 °C. Lag: +10%, (RF+ - RF-)/FR+, 1000g force. Response time: <10ms Drifting: <5%, 1 kg static load 24 hours. Weight: 1g/0.04oz (approx.) Package list: 2 x pressure sensors. Note: Please allow a small size error due to manual measurement. Thank you for your understanding. Package List