quality products. This switch controls the load and lamps when the motor activates the relay in standby After the engine is stopped, the relay is closed, and the auxiliary switch is lit and the load does not work. Please install the relay and the original car line, which is convenient and simple. The relay control system has two paths, that is, two relays are integrated in this small box, the use of components is safe and reliable, and the volume is relatively small, which is convenient to install on motorcycles, each relay is 20A, (240w), but Given that the current motorcycle battery is very small, it is strongly recommended that users do not have a current load of more than 10 (120w) with too much power. which will easily damage the original vehicle battery and rectifier and easily damage the original vehicle generator. Therefore, we are into online configuration is 20A fuse. Specification: Type:Switch Control Button Fitment Type:Direct Install Fitment: For R1200GS LC 2013-2018 For R1200GS ADV LC 2014-2018 (ADV model need to install in Righ Position)(ADV left hand mounting position is occupied) For R1250GS 19-21 For F750GS 19-20 For F850GS 19-20 Material:ABS colour:Gray Package Contents: 1 x Switch Control Button Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.