Feature:1. Static Electricity Remover: This horizontal ionizing fan can quickly eliminate static electricity and cover a wide range of airflow. The wind speed can be adjusted within a large range by the speed control switch. Commonly applied in the assembly and testing process of flat panel displays.2. Wide Application: This ionizing air blower can prevent static pollution and damage, eliminate static electricity during the production process of LCD modules, containers, resin molded products, chips on tray, and batteries, and remove dust from adhering to substrates.3. Rotating Cleaning Net: The security net with built in cleaning brush can rotate, which helps to remove stain accumulated on the ion needle and dust accumulated on the ionization device, effectively reducing the failure rate of the ion fan and greatly extending its service life.4. Working Principle: It can generate a large amount of airflow with positive and negative charges, neutralizing the charges carried on the object. When the surface of an object carries negative charges, it attracts positive charges in the airflow, achieving the goal of eliminating static electricity.5. Ionizing Device: Under the action of low current and high voltage generated by the high voltage generator, a stable high voltage electric field is formed. Ionized air forms ionized particles, which are carried out by the airflow to the surface of the object, achieving the goal of neutralizing static electricity.6. Air Heating Function: This ionizing blower fan provides warm air to protect the operator from cold air damage. Equipped with external control switch, the heating function can be turned off when heating is not needed. It can effectively solve production problems caused by static electricity.Specification:Item Type: Ionizing BlowerMaterial: Cold Rolled SheetAir Volume: 190CFM (Maximum)Operating Temperature: 0-50 (32-122)Ozone Volume: Below 0.03PPM (measured at minimum fan speed 15cm in front)Noise: Minimum: 55dB, Maximum: 65dBAirflow Area: 60cmx120cmIon Balance: 0V10VStatic Electricity Removal Time:Tester DistanceCenter Line Left 300mmCenter LineCenter Line Right 300mm300mm or 11.8in1.5S1.1S1.4S600mm or 23.6in2.8S2.2S2.8S900mm or 35.4in3.9S3.6S3.8S1200mm or 47.2in5.6S5.5S5.9SFeatures: 1. Rapid static elimination.2. Large coverage of ionized airflow.3. Wide range of airflow adjustment.4. Equipped with a dedicated ion emitter cleaner.5. Requires additional installation of cold air heating device.6. Ionization indicator.7. Fan with good grounding protection..Package List:1 x Ionizing BlowerNote:1. The ion balance voltage and electrostatic elimination time meet ESD standards, and the electrostatic elimination time is measured from the test voltage of 1000.2. The test instrument uses the ME268A electrostatic comprehensive tester.3. The test data will be different due to the temperature and humidity changes of the surrounding air.