1、The flowmeter control panel adopts modular design, multiple measurement units conversion, complete functions, convenient operation and simple structure. 2、It can be used to measure methanol, kerosene, diesel, fuel, urea water. It is widely used in petroleum, chemical, pharmaceutical, transportation, food and other industries and commercial fields. 3、Digital LCD display, high‑definition display shows instantaneous and cumulative flow and NPT counter. 4、Clear and accurate measurement, intuitive and clear reading, high reliability, measurement accuracy ±1%. 5、4 unit options, liter (L) / gallon (GAL) / pint (PTS) / quart (QTS), used in different countries. Easy to clean, install and maintain. Item Type: Flow Meter Material: ABS Standard: Vertical Media: Methanol, diesel fuel, kerosene, chemical liquid, urea water Importers: 1in internal thread Measurement Accuracy: ± 1% Repeatability: ± 0.5% Maximum Working Pressure: 20BAR Standby Time: 2 Years Flow Range: 10 - 120L / MIN Single Count: 0.00 - 999.9 Total Cumulative Number: 0.00 - 999999.9 Unit: L / L, gal / GAL, pint / PTS, quart / QTS Single Measurement Cleared: RESET Battery: Built-in battery, 2 x AAA batteries, 500mAh(include batteries) Setting Units of Measurement: 1. In the standby mode, or raise the amount of current display state 2. Press CAL + RESET button for 5 seconds 3. Enter unit conversion settings, press the RESET button 4. Followed by LTR - GAL - PT -QT - LTR choose the unit of measurement 5 .While the cumulative filling volume displayed in the current unit of measure conversion after 6. Press the MENU key for 3 seconds to exit the unit conversion settings. Operating Instructions 1. Measuring Unit Setting Under standby state or current amount display state, press and hold MENU+RESET buttons for 5 seconds to enter unit conversion setting, then press RESET button to select unit in turn of LTR - GAL - PT - QT - LTR. Press and hold MENU button for 3 seconds to exit unit conversion setting. 2. Accumulative and Current Amount Reset Press and hold RESET button and LCD screen displays on full screen, wait till the full screen display end then loose the RESET button. At this time the accumulative amount and current amount is reset. 3. Error Coefficient and Accumulative Amount Inquire Under standby state, press MENU + RESET button together, then LCD display shows the error coefficient on the upper row, and accumulative amount on the lower row. 4. Error Coefficient Calibration Under standby state or current amount display state, press and hold MENU button for 3 seconds to enter error coefficient calibration mode. The first digit flashes, press MENU button to change position of the digit, and press RESET button to change digit. As this coefficient increases, output oil quantity reduces. Then press and hold MENU button for 3 seconds to end error coefficient calibration and return to current amount display state, and the current amount is reset as zero. The calibration error coefficient range is 0.1000 to 9.9999. For example, original coefficient is 1.000, when it displays 100 liters output of oil, the actual oil output is 100L. If you need 2 liter reduced, set the coefficient as 1.020, then the output would be 98L. 5. Maintenance 1 x Flow Meter 1 x Adapter 2 x Rubber Seal Ring