It is an LTE Cat-1 module that supports wireless communication modes such as LTE-TDD and LTE-FDD, and supports up to 10Mbps downlink rate and 5Mbps uplink rate. The module supports operating systems such as /Linux, supports multiple network protocols, and the module size is the same as the SIM7000/SIM7070/A7670E series. Most of the AT commands are compatible with the SIM800 series. It has strong compatibility and is suitable for IoT applications such as telematics, monitoring equipment, industrial routers, remote diagnosis, and satellite positioning. Based on the for 40PIN GPIO interface design, it is suitable for series motherboards. There are 3 additional USB expansion interfaces on board, which can expand the USB interface for host devices such as for and PC. Supports network communication protocols such as IP, HTTP(s), MQTT(s), (s) and , supports RNDIS, NDIS and dial-up Internet access, and supports GPS, GLONASS, , BeiDou (Beidou) positioning. Communication parameters: Supported frequency bands:LTE-FDD:B1, B2, B3, B4, B5, B7, B8, , B13, B18, B19, B20, B25, B26, B28, B66 LTE-TDD:B34, B38, B39, B40, B41 Data transmission:less than equal 5Mbps(UL), less than equal 10Mbps(DL) GNSS:GPS, GLONASS, , BeiDou Working parameters: Supply voltage:5V Logic level:3.3V Due to different batches, the printed words on the product will be different, which does not affect use. Colour:As Shown Material:PCB Package Contents: 1 * SIM7670G Cat-1/GNSS HAT 1 * Cable 1 * GPS Antenna 1 * LTE Antenna 1 * 2x20PIN Female Pinheader 1 * USB 3.0 Adapter 1 * USB 2.0 Adapter 1 * Screws Pack Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.