1Relay Function: Support the relay function, when the relay status, the PC can view the data of each channel, and can also send data to each channel 2Easily And Quickly Analyze And Debug: The PC terminal can easily and quickly analyze and debug the communication between CAN1 equipment and CAN2, which is a CAN development tool for R and D engineers 3One Key Automatic Detection: CAN bus analyzer support one key automatic detection, channel selection, custom detection range 4Support Conventional Baud Configuration And Customization: The device supports conventional baud configuration and customization. Unconventional baud rates can be calculated through the baud rate calculation software, and then fill in the calculation results in the software 5Support Secondary Development: Compatible with for ZLG, for Trythink, for New Energy software, support secondary development Item Type: CAN Bus Analyzer Material: ABS shell Channel: 2 Isolation: DC2500AC1700 Power Supply: USB USB Speed: USB2.0 full speed 12M/S Software Support: Compatible with for ZLG, for Trythink, for New Energy Secondary Development: Support CAN Baud Rate: 5K-1M/custom CAN Standard: Support CAN2.0A and CAN2.0B protocol at the same time, conform to ISO Relay Transparent Transmission: 2A(not supported); 2C (supported) Matching Resistance: Built in 120ohms (flexible configuration) Interface Form: Screw terminal 1 x CAN Bus Analyzer 1 x USB Cable 1 x Screwdriver Working Temperature: 40~+85.