Wide range of applicationsLCD displayAutomatic manual multi-modeTTL serial communicationThe main functions of the system: automatic, manual, setting, serial port controlThis is an operation control module specially designed for single-axis stepper motors.The module has built-in multiple fixed operation modes,and the user can quickly select the appropriate motion trajectory.You can save and set distance/speed/delay/cycle times when power off.It can run independently as a module,or it can be used in conjunction with other systems.It can be used in general industrial control occasions,but cannot be used in special industries such as medical-treatment and fire protection or in life-critical fieldModel:-SMC01 Stepper Motor ControllerAdapter motor:stepper motorNumber of control axes:single axisMotor signal:common cathodePower supply range:DC 5-30V universalInstruction features:streamline and optimize many common instructionsAcceleration and deceleration control:yesInput reverse polarity protection:yesRemote communication control:TTL serial portMain functions of the system:automatic,manual,setting,serial port controlSpeed range:0.1-999 laps/minNumber of forward rotation pulses:1-9999 pulseNumber of reverse pulses:1-9999 pulseCycle work times:1-9999 timeForward delay time:0.0-999.9 secondInversion delay time:0.0-999.9 secondSegment selection range:1-128 segmentProduct use environment:-5°C-60°C(non-condensing)Colour:As ShownMaterial:plasticPackage Contents:1 * stepper motor controllerOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.