1、Configuration of high‑quality aviation cable connectors, with high‑quality anti‑corrosion, anti‑erosion function, can be used for a long time. 2、Light in weight, which can reduce friction, improve sensitivity, ensure the accuracy of measurement. 3、Three Cup appearance design, 360 degree wind speed measurement, low power consumption, stable performance, high efficiency. 4、Polycarbonate material, with acid and alkali resistance, oxidation resistance and other characteristics, greatly prolonged the service life. 5、The surface is treated by electroplating and spraying, which is anti‑corrosion and anti‑invasion, and has no rust phenomenon for a long time. 6、Waterproof four‑core cable, black shielded cable, waterproof, oil‑proof, anti‑interference ability, stable signal transmission. 7、With moisture‑proof and anti‑corrosion aluminium alloy shell, high precision measurement and wide range of measurement, it is a special meteorological measuring tool. 8、It can be widely used in wind speed measurement of power plants, wind speed and direction measurement of meteorological monitoring, wind speed and direction measurement of navigation and aviation, and intelligent wind speed and direction measurement of agriculture. Condition: 100% Brand New Item Type: Wind Sensor Material: Aluminum Alloy, Polycarbonate Output Voltage: 0-5V Wind Speed Measurement Range: 0-30m/S Accuracy of Wind Speed Measurement: +1m/S Response Time: <5s Baud Rate: 2400/4800/9600 Power Consumption: <1W Operating Temperature: -30 - 80℃ Working Temperature Environment: 0-100% RH (15-95% RH) Weight: Approx. 518g / 18.3oz Height: Approx. 12.4cm / 4.9in Wiring Instructions: Brown: Power Supply Positive (12-24V) Black: Power Supply Negative (12-24V) Yellow: V OUT+ Blue: V OUT- Application: Wind speed measurement of power plant, wind speed and direction measurement of meteorological monitoring, wind speed and direction measurement of navigation and aviation, wind speed and direction measurement of agricultural intelligent wind speed and direction measurement Installation Method: 1. Ensure that the mounting bracket is parallel to the ground; 2. Installation with flange and fixing with bolt on bracket; 3. Connect the air socket connector with the air socket of the sensor through the reserved air route hole. 1 x Wind Sensor 1 x Cable 1 x Bag of Screws