10L Ultrasonic Cleaning Machine Heating Power Adjustable Ultrasonic Washer with Basket Item Type: Ultrasonic Cleaner Material: Stainless Steel Ultrasonic Power: 240W Time: 0 to 30 minutes Inner Tank Capacity: 10L Interface Size: 3/8inch Shock Head: 4 Ultrasonic Frequency: 40khz Application: Cleaning electronic products, laboratory supplies, office supplies, household supplies, computer motherboards and accessories, glassware, circuit board, auto parts, hardware parts, medical instruments, watches, dentures and dental equipment, glasses, jewelry, barber blades, nursing bottles, tableware, etc. Product Advantages: Cleaning tank is formed by stamping and has no weld Cooling System: Install effective cooling fan Operation Process: 1. After unpacking, shake the machine slightly, listen for any noise in the case, and confirm whether the parts are loose; 2. The machine shall be placed in a ventilated and dry place to ensure that the machine is in a horizontal position; 3. Add an appropriate amount of cleaning fluid as required for cleaning (2/3 tank depth<L<3/4 tank depth); 5. Adjust the ultrasonic working time: Mechanical type: After the power is turned on, turn the right timer knob clockwise until the required cleaning time is reached on the 0 to 30 minute time dial. The indicator light is on, and the sound of "ZIZI" is emitted, indicating that the ultrasonic starts to run 6. Adjust the working temperature (select heating only if necessary; mechanical PS 10 has no heating function): Mechanical type: Turn the temperature controller on the left clockwise until the required temperature (above 20 ℃ is enough) is on, and the heating part starts to work 7. Adjusting ultrasonic power (power regulating type): The knob on the right is the power adjustment, which increases the power clockwise and decreases the power counterclockwise; The power adjustment range is 40% to one hundred percent. The power should be adjusted slowly and steadily. After the power is set, do not adjust the power at will in order to prevent damage to the machine. 8. Shut down after completing the work: After cleaning, if no further operation is required, turn off the heating element and disconnect the power supply; After the cleaning solution cools to normal temperature, pour out the cleaning solution, and clean the inner groove and shell of the machine. After use, the machine should be placed in a dry and ventilated place to avoid moisture in the control circuit.