1PIR motion sensor indicator switch that automatically turns on when human activity or heat source motion is detected. When the person leaves, the highsensitivity sensor motionsensing light switch will automatically turn off. 2The maximum sensing distance is 12 meters and the detection angle is 180. It can also be used as a homesafe PIR sensor. Lightsensitive controls that do not turn on when the light is turned on in daylight or strong light conditions. 3Protection level up to IP44, can be used to automatically control corridors, hallways, washrooms, basements, warehouses, garages, etc. Automatic lighting, exhaust fans and automatic ventilation. 4You can adjust the sensing distance, delay time and working time according to your needs. The lamp sensing adjustment range is 5m12m (SENS knob), the delay time can be adjusted from 5s to 600s (TIME knob), and the working time can be adjusted to work at night or day and night. 5Product performance is stable, safe and convenient, energy saving. Motion sensor wall lights is easy to install, you can choose wall installation, suction point installation, ceiling installation, etc.Condition: 100% Brand NewItem Type: Light SwitchMaterial: PlasticColor: As shown in the pictureSize: Approx. 9x10x6cm / 3.5x3.9x2.4inWeight: Approx.154g/5.4ozWorking Voltage: 110-240V wide voltageRated Load Power: 1200W (10A)Sensing Angle: 160 degrees for left and right; 25 degrees for up and down.Sensing Distance: 10 2 meters/ 32.8 6.6ft (related to the temperature, the lower the temperature, the farther the sensing distance) }1 x Light Switch2 x Screw2 x Expansion Screw1 x Instruction Manual1. Please allow 1&8209;2in error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.