REMOTE CONTROL FOR WIRELESS WINCH UNIVERSAL12V Wireless remote control, allows you to operate the winch within 50 feet without the need for cables or switches. Easy to operate, you can start, stop, pull in or out the winch by pressing the remote control transmitter. Suitable for most self-recovery winches such as Warn, Ramsey, Superwinch, Smittybilt, Gorilla, Bulldog, etc. Designed with visual light indicator, which can clearly and intuitively display remote operation, convenient to use. Manufactured according to original production specifications, according to strict quality standards, long service life. Specification: Item Type: Winch Remote Control Kit Material: ABS metal Battery Type: Alkaline Battery (Included) Battery capacity: 150 mAh Battery model: 12V 23A Frequency: 434MHz Voltage: 12V Remote control size: approx. 43 x 100mm/1.7 x 3.9in Receiver size: approx. 43 x 70mm/1.7 x 2.8in List of packages: 1 x Remote Control 1 x Receiver 1 x Manual Wiring: 1. Red wire: positive () 2. White Wire: OUT 3. Yellow Wire: IN 4. Black wire: negative (-) 5. Blue Wire: Antenna Features: Remote range is up to 50 feet. The transmitter is equipped with a long service life. Battery and power saving circuit. Transmitter and receiver. Visual indicator shows remote control. An additional transmitter that can be used to operate the receiver. Installed in minutes. The replaceable transmitter battery is available at any time. Suitable for truck, ATV, SUV The wireless remote control is only designed for the front self-recovery winch. The remote control is not intended and is not used in industrial applications (commercial vehicle transporter/transporter, scrap metal, crane, etc. ) or in any other application of remote control of winches or cranes. We recommend operating the winch as follows: 1. Loosen the winch clutch. 2. Pull out the winch rope for about 1,5 meters. 3. Turn the winch clutch back on. 4. Insert the remote control receiver plug into the female electromagnetic control box connector of the winch. If your wireless remote control is type -03, you should properly connect the black ground wire to the negative pole of the battery. 5. Put the receiver somewhere. 6. Keep the receiver antenna straight. 7. Pull out the transmitter antenna and lower the transmitter cover to reveal the control buttons. 8. Press the button, you can control the winch to start, stop, enter and exit. (It is strongly recommended to find a professional to install)