12v 24v Car Battery Tester Analyzer Vrla Gel Agm Load Plug Startup Diagnostics Why do you need this battery tester? ;Select the test program according to the battery type/standard/CCA, the battery tester will start working and quickly display the battery's CCA value, health (%), state of charge (%), voltage (V), internal resistance (), etc. ;;By analyzing the test data, you can check the condition of the battery and judge whether the battery is in good condition or needs to be replaced to avoid accidents caused by battery failure. ;;The small and compact design is easy to carry and store. ;What type of battery can it test? ;The FBT200 battery analyzer can detect all 12V and 24V lead-acid automotive batteries, such as common flooded batteries, AGM flat batteries, AGM spiral batteries, and GEL batteries used in cars, SUVs, light trucks, motorcycles, etc. It provides you with accurate test results in just 3 seconds according to SAE, DIN, IEC, EN, CA, JIS standards. ;You can't test lithium batteries. ;Scope of use: All automotive lead-acid starting batteries, including conventional flooded, EFB, AGM, AGM wound, GEL, WET, etc. Applicable to: car factories, garages, car battery manufacturers, car battery agents, educational institutions, DIY enthusiasts, etc. ; Test range: 3AH - 200Ah; Test results: SOH, SOC, CCA value, IR; etc.; Test standards: SAE, DIN, IEC, EN, CA, JIS; Voltage measurement range: 8-30 VDC; Housing material: ABS plastic; Display: 2.7-inch LCD screen; Cable range: 650mm (25.6 in); Storage temperature: -20'C to +70'C (-4'F to 158'F);; Operating temperature: -20'C to +60'C (-4'F to 140'F); Dimensions (L*W*H): 150*90*35mm (5.9*3.54*1.38 inches); Weight: 325g (0.72lbs)