2-Pack Fluoride Reduction Filters for Water Purification Systems K5366

١٤٩٫٠٠ ر.س.‏
+ ٥٧٫٤٩ ر.س.‏ الشحن

2-Pack Fluoride Reduction Filters for Water Purification Systems K5366

البائع:

١٤٩٫٠٠ ر.س.‏

وفّر ٦٠٫٠٠ ر.س.‏ (28%)

السعر الأصلي

٢٠٩٫٠٠ ر.س.‏
في المخزون
+ ٥٧٫٤٩ ر.س.‏ الشحن

سياسة الإرجاع لمدة 14 يوما

طرق الدفع:

  • العلامة التجارية: Unbranded

تفاصيل المنتج

تفاصيل المنتج

2-Pack Fluoride Reduction Filters for Water Purification Systems K5366

1. With the blue caps in place, wash the exterior of each fluoride filter element with water and mild dishwashing soap, then rinse thoroughly. With clean hands, remove both blue caps from each end of both filter elements. 2. Place the tan-colored rubber priming button onto one end of a fluoride filter element, aligning the hole of the filter with the hole of the rubber washer. Press the priming button firmly against the sink faucet to create a seal between the faucet and the fluoride filter. Place your thumb on top of the faucet to apply additional pressure for a secure seal. 3. While holding the priming button against the faucet, slowly turn on the cold water supply, allowing water to fill the filter cavity and flow out from the opposite end. Allow water to flow for at least several minutes or until it runs clear. 4. Turn the fluoride filter over and prime the opposite end—reversing the direction of water flow—and repeat step 3 until water runs clear from both ends. 5. To verify full priming, collect the filtered water in a clear glass and hold it up to the light. If cloudiness remains, continue priming until the water is completely clear. The filter is now fully primed and ready for installation. Repeat these priming steps for each additional fluoride filter. Material: Plastic Color: White Package Contents: 2 x Water Filter Note: Due to variations in product batches, component appearance may differ slightly, but functionality is unaffected. Light reflection and display settings may cause slight color variation between the image and the actual product. Measurement tolerance: ±1–3 cm.
  • هوية Fruugo: 477333596-994687361
السلامة

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

تحذيرات السلامة:
  • Check the product before use
  • do not approach the fire source
  • to ensure safe use.

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Li Yinglan
  • Shanghai Yinglan Technology Co., Ltd.
  • No. 18, Lane 65, Huandong 1st Road, Fengjing Town
  • Shanghai
  • CN
  • 201501
  • [email protected]
  • 13539268274

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • ES Adwan
  • GOLDENCLICK SL
  • Calle del cincel 18, Nave 1.6
  • FUENLABRADA/MADRID
  • Spain
  • 28947
  • [email protected]
  • 34910602659
التوصيل

توصيل

يُرسل خلال ٣ أيام

  • STANDARD: ٥٧٫٤٩ ر.س.‏ - التسليم بين الجمعة 25 سبتمبر 2026 – الأربعاء 07 أكتوبر 2026

يُشحن من الصين.

الإرجاع

الإرجاع

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل.

عرض سياسة الرد الكاملة