Release handle pins fit for Packout rolling tool box Our release handle pins are made of high-quality metal, which is stable and not easy to break, safe and reliable, and more durable for long-term use. After installing the release handle pins, you can adjust the height of the handle and place your Packout rolling tool box on the car or other locations. The package includes: 2 x Handle Pins, 1 x 7/32 in or 5mm Drill Bit, 1 x Threaded Bolt The handle release kit for the Packout rolling tool box can be installed in minutes. STEP 1: Remove the 2 screws located on the back that hold the handle in place. Then remove the handle. STEP 2: Using the included 7/32 in or 5mm drill bit, enlarge the 2 screw holes. STEP 3: Using the included M6-1.0 threaded bolt, tap out and create threads in the holes. STEP 4: Install the 2 handle pins in the screw holes. Color: Silver Material: Stainless Steel Package Contents: 1 set x Pin Tool Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture to appear slightly different from the real thing. The measurement allowed error is +/- 1-3cm.