D16 CNC Machine Chip Removal Fan Scrap Sweeper Automatic Cleaning Tool for Engraver Dust Removing Colour: black + gold Material: metal Colour: black + gold Material: metal Product use method: The waste cleaner needs to be supported by BT series series ER series tool holders and D16 collets. Program a suitable tool path according to the processed product. After the cleaner is changed out of the magazine, the liquid pipe should be set to close. The starting speed is 500. After the fan blades are unfolded, they accelerate to the set appropriate speed and blow the workpiece downward. After the cleaning is finished, the main shaft is lifted to retract the fan blades. Product matters needing attention: The reserved space for height setting does not contact the products and fixtures on the workbench. The recommended distance is within 10-15CM. The door opening operation is prohibited during use. Product use parameters: D160 speed 7000 ~ 10000 feed is adjusted according to the product. D260 speed 4000 ~ 8000 feed is adjusted according to the product. Package Contents: 2* CNC Machine Chip Remover Fan Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.