1. 72Mhz 32-bit processor. USB 2.0 full speed device (USB-A/Mini cable included) 2. Field upgradeable software. Supports these major OBD protocols:CAN 2.0 (CAN/ISO15765) and K-line (ISO9141/ISO14230(KWP2000)/dual K line) 3. PassThru support with Windows DLL. Standalone datalogs to micro-SD / micro-SDHC card without a laptop 4. Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector 5. Able to log from Innovate Motorsports 2.5mm stereo MTS data bus. RGB status LEDs For ecu flash you can get info from this list: US Domestic Market Vehicles currently supported by EcuFlash For Subaru Impreza WRX 2001-2002 1.2 1.3S 1.3U 2.0 2001-2002 2003-2005 1.2 1.3S 1.3U 2.0 2003-2005 2006-2007 1.2 1.3S 1.3M 2.0 2008-2009 2.0 Impreza STi 2004-2007 1.2 1.3S 1.3M 1.3U 2.0 2008-2009 2.0 Impreza 2.5RS 2005 1.2 1.3S 1.3M 1.3U 2.0 Impreza 2.5i 2005-2006 1.2 1.3S 1.3M 1.3U 2.0 2007-2009 2.0 Forester 2.5 2005-2006 1.2 1.3S 1.3M 1.3U 2.0 2007-2009 2.0 Forester XT 2004-2006 1.2 1.3S 1.3M 1.3U 2.0 2007-2009 2.0 Legacy / Outback 2.5i / 3.0r 2005-2006 1.2 1.3S 1.3M 1.3U 2.0 2007-2009 2.0 Legacy GT / Outback XT 2004-2006 1.2 1.3S 1.3M 1.3U 2.0 2007-2009 2.0 For Mitsubishi Evo 5 1.3M 1.3U 2.0 Mitsu (for 2.0 only) Evo 6 1.3M 1.3U 2.0 Mitsu (for 2.0 only) Evo 7 1.3M 1.3U 2.0 Mitsu (for 2.0 only) Evo 8 1.3M 1.3U 2.0 Mitsu (for 2.0 only) Evo 9 1.3M 1.3U 2.0 Mitsu (for 2.0 only) Evo 10 2.0 (all 2nd Gen) 1996- 1.3M 1.3U 2.0 Mitsu (for 2.0 only) Eclipse GS/GT 2001-2003 1.3M 1.3U 2.0 Mitsu (for 2.0 only) Lancer OZ 2002-2004 1.3M 1.3U 2.0 Mitsu (for 2.0 only) Colour:As Shown Material:plastic Package Contents: 1 x 2.0+ECUFLASH Cable 1 x Dongle V1.20 1 x USB Cable 1 x CD(The appearance and color are random, and the designation is not accepted) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.