Feature:1. Bi-directional ArtNet DMX Controller: Our converter effortlessly bridges 2-way communication between ArtNet and DMX512 protocols, enhancing versatility for stage setups2. High-Speed ARM Precision: Powered by an ARM processor, our converter ensures rapid, real-time signal handling. Adhering to strict Art-Net protocol standards guarantees stable operation3. Plug andamp Play Convenience: Pre-set with IP 2. xxx and a subnet mask of 255.0.0.0, ArtNet-DMX2 is designed for straightforward use. No configuration is necessarysimply plug in and start controlling4. Input or Output Control: In input mode, convert DMX signals from conventional consoles into Art-Net for Ethernet distribution. Output mode receives Art-Net signals, converting them back to DMX512 for direct device control5. Unlimited Connectivity Potential: With standard RJ45 and DMX512 connectors, ArtNet-DMX2 integrates into any rig. Universally compatible, it unifies your lighting universe, unlocking the full potential of networked stage lighting controlSpecification:ConnectorsDMX: 2 x shielded and gold-plated 3-pin XLR (female)Network: 1 x 10 or 100Mbps RJ45 connectorPower: DC 9-12VDMX featuresSupport protocol: DMX512 (1986 andamp 1990), DMX512-A, RDM(optional) ANSI E1.20DMX Port direction: Input or output (configurable)DMX Port protection: 1.5KVDMX Port matching or offset: YesDMX parameter: Frame frequency: 10-40fps or Break: 176-352sEthernet characteristicsSupport protocol: Art-Net, UDP, TCP, ICMP, DHCPPort rate: 10 or 100BaseTXPort detection: Automatic negotiation, MDI or MDIXAdditional characteristicsConfiguration software: search discovery, easy configurationWEB Configuration: YesMaterial: Aluminum alloyColor: BlueItem Size: Approx. 9.3x8.7x4.7cm or 3.66x3.42x1.85inItem Weight: Approx. 230g or 8.11ozPackage Size: Approx. 14x14x6cm or 5.51x5.51x2.36inPackage Weight: Approx. 402g or 14.18ozPackage List:1 x 2 Way ArtNet Converter1 x Internet Cable1 x Power Adapter1 x U Disk