1.Integrated 10 or 100 or 1000M or 2.5G transceiver 2.Supports 2.5G Lite (1G data rate) mode 3.Compliant with USB3.1 Specification Revision1.0 4.Supports USB 3.1,3.0, 2.0, and 1.1 5.Supports CDC- 6.Supports CDC- 7.Supports LPM (Link Power Management) 8.Supports pair swap or polarity or skew correction 9.Crossover Detection and Auto-Correction 10.Supports Wake-On-LAN and "RealWoW " 11.Supports power down or link down power saving 12.Supports hardware (Cyclic Redundancy Check) function IEEE Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802. Supports IEEE 802.1P Layer 2 Priority Encoding Supports IEEE 802.1Q VLAN tagging Supports IEEE 802.3az (Energy Efficient Ethernet) Supports IEEE 802.3bz (2.5GBASE-T) Supports Full Duplex flow control (IEEE 802.3x) Software Offload NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, , UDP) and Segmentation Task-offload ( send v1 and send v2) support Supports jumbo to 16K bytes Supports Protocol Offload ( and NS) AOAC (Always On Always Connected) Supports 32-set 128- pattern exact matching Supports link change wake up Supports WPD (Wake Packet Detection) CPPM (Converged Platform Power Management) Supports L1 with 3ms BESL (USB 2.0) Dynamic LTM messaging (USB 3.0) Supports U1 or U2 or U3 (USB 3.0) Supports suspend System Requirements Windows Server ,2008, 2012, XP, Vista, 7, 8,10,11, 32 and 64 bit Colour:black Material:plastic Package Contents: 1x USB 3.0 Ethernet Adapter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is 1-3cm. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.