2Pcs Sealed Limit Switch Adjustable Momentary Limit Switch Pin Plunger NO+NC 250VAC Item Type: Sealed Limit Switch Material: PP flame retardant, brass Non inductive loads Resistive loads NC 10 NO Lamp loads NC 2.5 NO 1.25 Inductive loads Inductive loads NC 10 NO Motor loads NC 3 NO 1.5 OF Maximum: 600 g / 21.16 oz(approx.) RF Minimum: 100 g / 3.53 oz(approx.) PT Maximum: 2mm / 0.08in OT Minimum: 5mm / 0.2in MD Maximum: 0.8mm / 0.03in OP (mm): 44±1.2 FP: \Operating Speed: 0.01mm to 50cm/sec (locking plug type) Operation Frequency: Mechanical: 120 times/min, Electrical: 30 times/min Contact Resistance: 15mΩ or less (initially) Insulation Resistance: 100mΩ or more (below 500VDC) Dielectric Strength: 1,000VAC, 50/60Hz for 1 minute between non continuous terminals, 1,500VAC, 50/60Hz for 1 minute between current carrying and non current carrying parts, 1,500VAC, 50/60Hz for 1 minute between terminals and earth Vibration: Misfire Endurance: 10 to 55 Hz, 1.5 mm double amplitude Shock: Mechanical endurance: 1,000m/Sec² (approx. 100G'S), False action endurance: 300m/Sec² (approx. 30G'S) Ambient Temperature: When in use: -10°C ~ +80°C (no icing) Humidity: <95%RH Operating Life: Mechanical: Over 10,000,000 cycles (at rated OT value), Electrical: Over 500,000 cycles