2pcs Single Operation Amplifier OPA892 with Low Distortion/Noise/200mA High Current

Description<br> The bandwidth is 290MHz<br> The slew rate is 700V/μ s<br> The stabilization time is 30ns<br> (0.1%), gain of 10VN<br> OPAx892 remains stable at gains of 10 or higher and -9 or lower<br> These amplifiers have a high driving capability of 200mA<br> Each amplifier only consumes 7.5mA of power supply current<br> OPAx892 has a total harmonic distortion (THD) of -68dBc at f=1MHz, designed specifically for applications that require low distortion<br> Due to maintaining low distortion within a wide output voltage range<br> OPAx892 is suitable for large dynamic range applications such as imaging, sonar, and audio<br> Production materials<br> The core operational amplifier is a genuine single operation OPA892 patch SOP8 package<br> Surface mounted SOP8 package to direct insertion DIP8 package<br> The direct insertion device will conduct high-precision AP testing on each chip to verify residual noise (usually in uV) and THD (usually in 0.00%), so you can buy with absolute confidence!<br> Residual noise: uV<br> Signal to noise ratio: 1 * *. 5dB<br> Dynamic range: 1 * *. 9dB<br> THD distortion: 0.0000 * *%<br> THD+N distortion: 0.000 * * *%<br> Intermodulation distortion: 0.000 * * *%<br> Frequency response bandwidth: ± 0.050dB<br> Color: As Shown<br> Material: PC<br> Package Contents:<br> 2*single operation amplifier<br> Only the above package content, other products are not included.<br> Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.