2X ESP32-S3-CAM Camera Module ESP32 CAM WiFi Bluetooth Development Board with 2MP OV2640 Module

ESP32S3 Camera, Plug-in Camera Wi-Fi and Bluetooth Plug-in Camera ESP32-S3 Chip SD Card Slot. The ESP32S3 is a compact, cost-effective AI vision module based on the ESP32S3. It supports Wi-Fi image transmission, face detection, color recognition, and other AI functions. The vision module utilizes a standalone expansion board design with onboard Type-C connectors, an IC connector, a reset button, and user-defined buttons. The ESP32S3 vision module can detect faces and perform color recognition using a high-definition camera. 2MP (OV2640), 5MP (OV5640) Dimensions: 40 x 27mm Weight: 14g Instructions: 1. Plug the camera into the module connector, snap it into place, and connect it to a computer via a Type-C cable. 2. To download the program, use for Arduino to open the CameraWebServer file and modify the Wi-Fi name and password on line 41. Then connect the device to a computer via the Type-C port and compile and upload the program. (If an error message appears, install the latest for Arduino 2.3.6 and ESP32 3.2.1 packages.) 3. Open for the Arduino serial monitor, press the RST reset button on the camera module, open the output URL in for Google Chrome or for Microsoft Edge, scroll down to find the Start Stream button, and click it to display the camera feed. Drag the LED Intensity slider to illuminate the flash. (The product printed words may vary depending on the batch, but this does not affect use) Color: Black Material: PCB Package Contents: 2 x Camera Module 2 x 8P Single Row Pin Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.