3000W High Power Immersion Heater Bucket Electric Water Heating Rod for Bathing Condition: Item Type: Immersion Heater Material: PP + Copper Plating Rated Power: 3000W Rated Frequency: 50HZ Total Length: Approx. 1.22m / 4ft Weight: Approx. 335g / 11.8oz Use Method and Note: 1. Place the container in a stable place and then place this product. When water is injected, the electric heating tube must be immersed in the water. 2. When the hands and plugs are dry, turn on the power. 4. Avoid twisting and knotting of the power cord during use of this product. In case of overturning, cut off the power immediately. 5. After the water is burned, cut off the power immediately and remove the product after 30 seconds. The surface of the electric heating tube that has just been taken out has a high residual temperature. Avoid contact with the human body, power cord, and not heat-resistant objects, and handle it properly. 7. It is strictly forbidden e when empty burning, that is, do not use it in the absence of water or lack water, otherwise it may shorten the service life or damage. 8. The firstly boiling water is not suitable for drinking. 9. This product should be placed in a dry, cool and proper place. 10. If the wall of the electric heating pipe is damaged, it should be replaced immediately. Do not use it.