Feature 1The product have strong suction force, which is an ideal tin removal tool for thick film integrated circuits and large solder joints of large components 2Support to be used with one hand independently, and can be removed for a long time after 5 minutes of power on 3A good helper to improve work efficiency during maintenance. Automatic soldering is fast and convenient 4Equipped with three specifications nozzles (1.0mm, 1.5mm, 2.5mm), easy for you to replace 5Come with a nozzle cleaner, which helps to prevent nozzle clogging the next timeItem Type: Electric Solder SuckerMaterial: Plastic + stainless steelModel: BBT-580Heater Power: 30WElectromagnetic Power: 350W (momentary)Insulation Class: E classWorking Method: ContinuousProduct Category: Chip-level repair tools-motherboard repair toolsEquipped with three nozzles (approx. 1mm / 0.04in, 1.5mm / 0.06in, 2.5mm / 0.1in)How to Use: 1. First connect the power supply and let the suction nozzle heat up.2. It is ready to use after 5 minutes.3. Put the suction nozzle on the part that needs to be removed from the solder.4. When the solder is dissolve, the tin can be sucked out by pressing the button.5. Press and hold the handle switch, remove it from the solder joint, and release the switch to automatically spray out the pot. Total Length: Approx. 245mm / 9.6inMachine Diameter: Approx. 32mm / 1.3inHead Length: Approx. 85mm / 3.3inPackage List1 x Electric Solder Sucker3 x Nozzle1 x Nozzle Cleaner1 x User ManualNoteWhen cleaning and replacing parts, you must turn off the power and wait for the tin pump to cool down completely.