Features: 1.Double Sided Coating: Hot bed accessories are double sided coated with gold powder on one side and pre glued glossy PEI on the other side. PEI sheet is pre glued by the machine,please tear off the PEI surfaces lamination before use. 2.Applicable Models: Hot bed steel plate is flexible, removable, high strength and heat resistant, compatible with for Crealty CR 6 SE, prints are easily removed from the surfaces when the temperature of the heated bed reaches room temperature. 3.Material Compatibility: The 3D printer steel sheet is suitable for most filaments, PLA ABS PETG TPU PVA Wood carbon fiber, etc. It can print directly on PEI surfaces without additional adhesives, tapes or pastes. 4.Easy to Use: The double sided coated sheet is very easy to use, just stick the bottom sheet to the heating bed, then put the steel platform on the top, both sides are available for printing, convenient. 5.Easy to Remove: Flexible steel PEI sheets are made of spring steel, so they won't kink or twisting when you bend them slightly, they adhere easily to the printed surfaces and are easy to remove from the print. specification:Item Type: 3D Printer Build Plate Material: Metal Product Size: Approx. 254 x 245mm / 10 x 9.6in Color: Gold Material Compatibility: PLA ABS PETG TPU PVA Wood Carbon Fiber, etc. Applicable Models: For Crealty CR 6 SE PackageList:1 x 3DPrinterBuild Plate 1 xMagneticSticker Note1. Manual Measurement, Slight Error May Exist 2. Printing ABS requires an insulated environment