3KW Steam Generator Steam Shower Automatic Descaling SPA Sauna Bath Generator Steam Room Accessory 220‑240V Item Type: Steam Generator Material: Stainless steel Power: 3KW Application: Steam room Voltage: 220-240V, 50-60HZ Product Size: Approx. 30.5 x 23 x 13.5 cm / 12 x 9.1 x 5.3 in Weight: Approx. 5750g / 202.8oz Function: 1. When the temperature rises to a certain height, it will automatically power off to avoid leakage caused by excessive temperature 2. Apply the trend numerical control technology, say goodbye to the rotation button 3. The water tank is enlarged, 20% larger than the ordinary water tank, and the steam effect is better When taking a steam bath, keep in mind: 1. The elderly, pregnant women or patients with heart disease, high blood pressure, diabetes or other bad health reasons cannot use this device temporarily. unless under the guidance of a physician 2. It is strictly forbidden to smoke, exercise or drink alcoholic beverages during the steam bath 3. Please exit the steam room immediately when you feel unwell, nauseated or sleepy 4. Take care of your children at all times while in the steam bath 5. It is necessary to install an exhaust fan outside the steam room to circulate the air Warning: 1. If the machine is installed in a place where it is difficult for users to get close to the operation, the water supply valve must be installed in a place where it is easy to operate in an emergency 2. The pressure of the solenoid valve is 2Kg/cm². If the water pressure is too high, in order to avoid the damage of the solenoid valve, the water inlet valve can be properly closed or a water inlet pressure reducing valve can be installed 3. Do not use saddle valve or needle valve on the inlet pipe. The water pipes should be unclogged and flushed before the final takeover 4. It is strictly forbidden to install blocking valves in steam pipes. Obstruction or bending of the "U" channel is strictly prohibited. Otherwise, condensed water will be produced to hinder the flowing of steam. The steam pipes should be inclined to a certain extent when they are arranged horizontally, so that the condensed water can flowing back to the steam generator or to the steam nozzle 5. The steam generator cannot be installed outdoors to prevent ice from forming inside the machine. And it must be installed in a place that is easy to maintain. The machine should be installed horizontally and the arrows direction is upward, otherwise it cannot be turned on 6. The pipe installation must be made of copper pipe material. It is strictly forbidden e plastic, acrylic, aluminum plastic pipe or other similar materials as the steam pipe. The allowable temperature for these materials is less than 150°C and higher 7. The inlet of the steam pipe, all other inlets and gaps should be sealed to prevent steam leakage and damage to the machine and other objects 8. Draining the water from the water tank into the steam room may cause scalding accidents and damage the building materials used in the steam room