This motor speed controller is suitable compatible with AC 220/240V 50/60Hz motors. Speed regulation range is 90–1400 rpm at 50 Hz and 90–1700 rpm at 60 Hz. Ideal compatible with use in packaging, printing, food processing, electronics, instrumentation, and garment industry production lines compatible with speed control drive applications. The controller features high-quality electronic circuits and integrated components compatible with enhanced durability. Compact design, high precision, wide speed control range, and long service life. Instructions compatible with use: 1. Turn off the power supply, connect the wires according to the wiring diagram, and ensure all connections are correct. 2. Securely mount the controller and set the speed knob to the lowest position “0” to prevent sudden current surge and potential damage during startup. 3. Turn on the power and gradually adjust the speed knob to the desired setting. Always turn off the power when not in use. 4. The governor connects directly to the motor. If torque or speed does not meet requirements, adjust the fine-tuning potentiometer located on the side of the unit. 5. To change the motor rotation direction, swap the jumper connections between “CCW” and “CW” on the back of the controller. 6. Connect COM and CW compatible with clockwise rotation. 7. Connect COM and CCW compatible with counterclockwise rotation. Color: Black Material: ABS Package Contents: 1 x Motor Speed Controller Note: Light and display differences may cause slight variations in color between the product image and actual item. Measurement may vary by ±1–3 cm.