433MHz garage door remote control, compatible with Nice Flor-s models

Product Description 433MHz garage door remote control unit, compatible with Nice Flor-s series, suitable for RT1000 programmable remote garage door and motor. Hold the original remote control in your left hand and our self-test remote control in your right hand. Bring the two remote controls as close as possible and press the corresponding buttons on both remote controls simultaneously. The LED indicator will flash continuously, indicating that the button code on the original remote control has been changed by our self-test remote control. Press buttons A and B simultaneously. The indicator light will flash. Make sure the LED flashes once and then goes out, do not release the buttons. After 2 seconds, the LED will start flashing, indicating that the code has been cleared. Press and hold the CD button for 2 seconds. After 3 seconds, the LED will light up and then flash rapidly, indicating that the code on the automatic copy remote control has been restored. Before using our automatic copy remote control to copy, be sure to clear the existing code first. The LED flashing speed depends on the transmitting oscillation resistor of the copy remote control. There is a way to test whether the existing code on the automatic copy remote control has been successfully erased: After completing the erasure operation, you can press any key. If the LED indicator flashes once immediately and then goes out, it means that the sub-copy code has been erased. Reference models that can use a 433 MHz remote control include: 2262, 2260, 5026, 5326, 5326-3, 5326-4, FP527, PT2240, EV1527, HT6010, HT6014, HT12E, HT640, HT680, PLC168, SMC series, 9XX, PT2292, 12L-4SC, HT6026, and UM3750AM.