Stable output power 4 Power levels up to 1600mW; 48 Channels VTX telemetry with Tramp protocol Product :1. Input voltage: DC7-34V (2-8s Batter input). 2. Working current: 120-860mA (12V/25mw-1600mW). 3. Working temperature: -10~60℃. 4. Video input impedance: 75Ω 5. Size: 36x36x6mm 6. Antenna interface: MMCX 7.Format: NTSC/PAL 8.Protocol: Tramp 9. Product weight: 18.9g 10. Output power: 25mW/400mW/800mW/1600mW Precautions 1. Before turning on the power, you must make sure that an antenna has been installed at the image transmission end, otherwise it will Will damage components 2. High temperature will be generated when image transmission is working. Please do not touch it directly with your hands to avoid . 3. Leave space at the image transmission installation location to air convection around the module. Module heat dissipation. 4. When using this product, please comply with local radio laws and regulations, and use locally permitted Channel frequency. 5. Before turning on the power, make sure the voltage range is correct 7-36V, and the positive and negative poles are correct to avoid damaging the components. 6. Use high-quality antennas to effective output of image transmission performance. 7. If the image transmission is in a static state for a long time after being powered on, set the power to the minimum. Colour:Black Material:Metal Package Contents: 1 x 5.8GHz 1.6W 48CH VTX 2 x Connecting cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.