Solar Inverter MPPT Charge Controller 5KW 220 230VAC Pure Sine Wave for Appliances Item Type: Solar Inverter Material: Aluminum Alloy Mains Mode: Overload and Circuit Breaker Protection: Circuit Breaker Efficiency: >95% Bypass and Invert Conversion Time: 10ms, typical value. AC Back Irrigation Protection: Yes Maximum Bypass Overload Current: 40A Inverter Mode: Rated Output Power: 5000VA( 4350VA, 4500VA, 4800VA, 5000VA) Rated Output Power: 5000W(4350W, 4500W, 4800W, 5000W) Efficiency: ＞ 90% Overload Protection: 102% < Load < 125% ± 10%: Shut down the output 5 minutes after the wrong well is reported. 125% < Load < 150% ± 10%: Error is reported and output is closed after 10 seconds. Load > 150% ± 10%: Error is reported and output is closed after 5 seconds. Peak Power: 10000VA On Load Motor Capacity: 4HP Output Short Circuit Protection: Circuit Breaker Specification of Bypass Short Circuit: 40A Power Saving Mode: Load ≤ 50W Mains Charging: Battery Type: Lithium battery. Maximum Charging Current: 60A Circuit Breaker Specification: 40A Overcharge Protection: Warn and turn off charging after 1 minute. Solar Charging: Maximum Output Power: 5000W Solar Charging Current Range, Settable: 0-80A Charging Short Circuit Protection: Fuse. Wiring Protection: Reverse connection protection. Certification Specification: Specification Certification: CE (EN62109), RoHs EMC Certification Level: EN61000 Operating Temperature Range: -15 ~ 55℃ Storage Temperature Range: -25 ~ 60℃ Humidity Range: 5% ~ 95%, paint protection. Noise: ≤ 60dB Heat Dissipation: Forced air cooling, adjustable wind speed. Communication Interface: USB, RS485 for WiFi and GPRS. Dry node control.