Feature: 1. It can be used for distillation, drying, concentration, constant temperature water bath heating, heat preservation fot artificial insemination. 2. The large LED screen clearly displays the preset real‑time inner tank temperature, which is easy to read. 3. The button can increase or decrease the heating temperature. The operation is simple and it is a very good tool. 4. Automatic constant temperature control to ensure the safety of hot water. Built‑in thermometer sensor, heat detection is fast and accurate. 5. The water bath is made of high‑quality stainless steel and can last longer. U‑shaped stainless steel heating rod, energy saving. Specification: Item Type: Water Bath Material: Stainless Steel Color: As shown in the picture Size: Approx. 44x14x22cm / 17.3x5.5x8.7in Weight: Approx.3800g/134oz Voltage: 220V Plug: AU Power: 600W How To Use: 1. Turn on the power and set the temperature: Press the SET button to set or view the temperature set point. 2. Press the SET key once, and the characters of the digital tube start to flash, indicating that the meter enters the setting state. 3. Press the △ key to increase the setting value, and press the ▽ key to decrease the setting value; long press the △ key or ▽ key to change the data; press the SET key again and the instrument will return to working status, and the temperature setting is complete. . Package List: 1 x Water Bath2 x Stainless Steel Fitting10 x Plastic Rings Note: 1. Electricity: The product uses 220V AC power supply. The power socket should be grounded with a three‑hole socket, and the earth wire must not be connected to the gas pipe.2. Pour water into the pot above the partition board before powering on. The heating tube should not be exposed to the water surface during use, otherwise the heating tube will be burned or even cracked or the solder will melts and leaks.3. If it needs to be used for distillation with boiling water at 100℃, add too much water to avoid overflow when boiling.