Pad Printing Oil Cup Product overview A replacement oil cup designed for pad printing applications, supplied with a ceramic ring for durable, stable contact. Intended to fit cutter rings with the following dimensions: outer diameter 90mm, inner diameter 82mm, height 13mm. Knife edge type is Single edgedouble bevel RJ2 to improve conversion rates. Key benefits Durable ceramic ring: Resists wear at the contact surface, reducing the need for frequent replacements and maintaining consistent performance over time. Precise compatibility: Sized specifically for cutter rings with OD 90mm, ID 82mm, and height 13mm for a secure fit and reliable operation. Improved print transfer: The Single edgedouble bevel RJ2 knife edge is designed to enhance ink pickup and transfer consistency, helping to reduce misprints and rework. Easy maintenance: The straightforward design and durable contact ring simplify cleaning and routine maintenance, reducing machine downtime. Stable performance: The ceramic contact surface helps maintain steady pressure and alignment during printing cycles, supporting consistent print quality. Function and attributes Function: Serves as the oil cup/contact ring assembly in pad printing setups, providing the interface for ink delivery and blade contact. Compatibility: Fits cutter rings with outer diameter 90mm, inner diameter 82mm, height 13mm. Confirm these dimensions before to ensure proper fit. Material highlight: Includes a ceramic ring at the contact surface for enhanced wear resistance and stable operation. Knife edge: Single edgedouble bevel (RJ2) configuration to support improved conversion rates during printing. Typical use scenarios Small parts production: Replacement oil cup for pad printing machines used in marking plastic components, lids, and caps where repeatable prints are required. Promotional products: In workshops producing branded promotional items, this oil cup helps maintain consistent ink transfer over long runs. Electronics and components: Suitable for marking small metal or plastic parts where precise and repeatable pad printing is needed. Installation and maintenance tips Verify cutter ring dimensions match outer diameter 90mm, inner diameter 82mm, height 13mm before installation. Clean contact surfaces regularly to prevent ink buildup on the ceramic ring and knife edge. Inspect the knife edge RJ2 for wear and the assembly if transfer quality declines. This oil cup is a direct, specificationdriven solution for pad printing setups that require a ceramic contact ring and an RJ2 single edgedouble bevel knife edge for stable, repeatable printing.