Adjustable Timer Relay Switch 1-480Min Delay Controller AC 110V/220V Power-On Delay OFF 7A Voltage Output

Function: Delay for a period of time to stop power supply. Small size, simple to use, stable performance. Module function: This module is a delayed shutdown module. When the set delay time expires, the power supply is stopped. Wide range of uses: such as exhaust fans, motors, air coolers, cooling fans, germicidal lamps, humidifiers, heaters, etc. Applicable scenes: living room, kitchen, bathroom, bedroom, corridor, stairs, etc. Parameters: Output current: 7A (MAX 10A) Working power consumption: 43mA Output voltage: AC110-220V Power supply voltage: AC 110-220V Maximum standby power consumption: 12mA Number of control channels: 1 output Working temperature: -25°C to 85°C Working humidity: 5% to 95% RH Control power: up to 1400W for incandescent lamps, up to 300W for energy-saving lamps Equipped with LED indicator to show working status (steady light indicates active, flashing indicates delay completed) 16 selectable delay modes: 1 min, 3 min, 5 min, 10 min, 15 min, 25 min, 30 min, 40 min, 50 min, 60 min, 90 min, 120 min, 180 min, 240 min, 300 min, 480 min Working status: After power on, the indicator light (PWR) stays on constantly; when the delay time ends, the indicator light flashes. Instructions: - Set the required delay time (do not adjust while powered); - After confirming correct wiring, apply power. Upon powering, the module starts working (indicator light remains on). When the delay time ends, the module stops power supply (indicator light flashes). 1. To stop early during operation, disconnect the main power supply of the module. 2. To start a new delay cycle, power the module on again. Color: As shown Material: PCB + Components Style: B with housing Due to different product batches, appearance may vary slightly, which does not affect functionality. Package Contents: 1 x Delay Relay Switch Note: Only the items listed above are included; other accessories are not included. Note: Lighting and display differences may cause slight color variations between the image and actual item. Measurement error allowed is +/- 1-3 cm.