Features:_x000D_ _x000D_ Used to frequently switch on and off on-load circuits._x000D_ The anti-slip design of the pedal makes the operation more effective, convenient and safe. _x000D_ Adopt double silicon rubber gasket, make waterproof grade can reach IP67, thus guarantee high reliability and safety, adopt limit switch action way to realize high reliability. _x000D_ The limiter adopts adjustable mechanical memory structure with reliable performance and high sensitivity. _x000D_ It is mainly used to control the reverse, direct and stop operation of the motor in the control loop. It can also be used for the direct control of the small motor in the main loop. _x000D_ Suitable for table drill, instrument machine tool, power machine, shearing machine, hydraulic press, medical device, etc. _x000D_ _x000D_ Specification:_x000D_ Model: TFS - 01_x000D_ Color: black_x000D_ Wiring length: 1m / 3.3ft, 2m / 6.6ft (Optional)_x000D_ Working voltage: 250VAC_x000D_ Rated voltage:250 (VAC)_x000D_ Rated current:10 (A)_x000D_ Contact form: one ON and one OFF_x000D_ Shell material: plastic shell_x000D_ Scope of application: control_x000D_ Foot switch pedal size: 100 x 60 x 33mm / 3.9 x 2.4 x 1.3in_x000D_ Contact resistance: below 50m (first time)_x000D_ Insulation resistance: 100M above, 500 VDC test_x000D_ Medium withstand voltage: 2000V AC, 1 minute time _x000D_ Mechanical life: 100,0000 times_x000D_ Electrical life: 100,000 times_x000D_ Environment temperature: -250 ~ + 700 (no condensation dew, no icing)_x000D_ Environmental humidity: 45% ~ 85% RH_x000D_ Package List: 1 x Foot Control Switch_x000D_ Note: 1. Pay attention to the rated load of the product according to the nature of the load and the current value._x000D_ 2. When handling and moving, pay attention to internal wiring short-circuit, break and so on._x000D_ 3. Use in a large number of water, oil, dust and other places should pay attention to the protecting level._x000D_ 4. Heavy pressure and impact are the direct causes of damage, please be careful._x000D_ 5. When modified for direct control of a small motor in the main loop, the front end of the power feed must be equipped with a fuse and an isolation _x000D_ switch.Because this switch has a phase power supply directly into the motor, the overhaul must be cut off the isolation switch to guarantee personal safety.