Working voltage: 12V to 24V (DC) (this means that any voltage between 12V or 24V can be used) No-load rotating current: Less than 500mA Maximum torque: 110kg.cm (24V) (actual measurement, non-theoretical calculated value) 1078N.cm(24V) (measured, non-theoretical calculated value) 55kg.cm(12V) (Actual measurement, non-theoretical calculated value) material: metal Color as shown 539N.cm(12V) (measured, not theoretically calculated value) Angular velocity: 0.12s/60 (0.12s is required to turn 60 degrees), at 24V; 0.24s/60 (0.24s is required to turn 60 degrees), at 12V; Rotation angle: 300MAX, which means the maximum travel is 300 degrees (0 to 300 electronic limit adjustable) Input mode: pulse signal (remote controller, multi-channel servo controller, single chip microcomputer) or analog voltage signal (potentiometer) Pulse signal input range: 0.5ms-2.5ms suitable for all "multi-channel servo controllers", "1ms-2ms model aircraft remote control", "MCU programming", "", etc. Package Contents: 1 x steering gear Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.