Automatic Small Intelligent Single Head Liquid Induction Multifunctional Quantitative Filling Machine 1. Input voltage: AC 110-220V 5060Hz 2. Output voltage: DC12V 3. Ambient temperature: 10 - 40 degrees Celsius 4. Medium temperature: 3.0L model: 5 - 50 degrees Celsius; 1.5L model: 5 - 100 degrees Celsius 5. Minimum flow rate: 3.0L model: 10ml; 1.5L model: 5ml 6. Maximum flow rate: 3.0L model: 3000mlmin; 1.5L model: 1500mlmin 7. 1s flow rate: 3.0L model: 50ml; 1.5L model: 25ml 8. Water pump flow rate: adjustable 9. Speed ??range: 01-99 PWM digital display speed regulation 10. Filling capacity setting range: 1-9999 11. Counter: Supported, counting range 1-9999 12. Pump head material: 3.0L: PBT plastic; 1.5L: PC plastic 13. Corrosion resistance: 3.0L: supports weak corrosion; 1.5L: not corrosion resistant 14. Scope of application: liquids with good fluidity, no particles 15. Power-off memory: supported 16. Adjustable range of filling bracket: 0-200mm adjustable 17. Check valve: yes 18. Suitable for bottle mouth inner diameter: greater than 12mm 19. Filling capacity range: 3.0L: 10-3000ml1.5L: 5-1500ml (note: the specific filling capacity depends on the bottle shape and specifications) 20. Conveyor belt interface: supports 12V conveyor belt expansion to realize automatic conveyor belt filling linkage 21. Sensor interface: with foot switch, and supports DC12V NPN three-wire sensor 22. Six working modes: - Inching: press and hold to release water, release to stop - Manual: press once to fill once - Automatic: automatic cycle intermittent filling - Foot switch: step once to fill once - Induction: fill once when the bottle is sensed - Conveyor belt: automatic conveyor belt induction filling 23. 3L large flow diaphragm pump: suitable for non-corrosive, non-particle-free liquids at room temperature with good fluidity, the recommended filling range is 10-100ml, such as beverages, liquor, vinegar, soy sauce, fruit juice, etc. 24. 1.5L heat-resistant diaphragm pump: suitable for non-co