A. Widely used for connecting/disconnecting power to one or other electrical devices, such as remote battery chargers, power inverters, solar installations, trailers, etc., or for any application requiring high current. B. Easy installation: One can quickly install these battery cable quick-connect and disconnect plugs. Insert the wires into the terminal pins and then solder or crimp them. The two ends of the connector are universal, so either end is suitable for connection to the power supply or load side. C. These connectors have many uses, including as connectors for batteries, jump cables, auxiliary batteries, boats, motorcycles, bicycles, forklifts, other electric vehicles, and a series of other power electronic devices and machinery. If two such connectors are used as a plug and a socket, one can easily achieve a solution for disconnecting and connecting the power supply. D. Current: 350A E. Voltage: 600 volts (maximum) F. Wire gauge: 2AWG G. Installation method: It is relatively simple to use and install. Insert the wires into the terminal pins and then solder or crimp them. Insert the terminal pins into the housing connector and lock them in place. H. Color: Gray I. Material: Plastic + Rubber J. Package contents: - 2 connectors - 2 dust covers - 4 terminal pins - 2 handles K. Only the above package contents are included, and other items are not included. L. Note: Light and different monitors may cause the color of the item in the picture to vary slightly from the actual item. The allowable measurement error is +/- 1 - 3 cm.