<p><strong>Solar Panel Extension Cable</strong>:</p> <p>3m Solar Panel Extension Cable with Female and Male Connectors</p> <p><strong>Describe</strong></p > <ul><li>- *The 3m 12AWG solar panel extension cable with female and male connectors (3m red + 3m black) is a high-quality product designed for professional solar panel installation for connection, electrical system design, and off-grid.</li><li>-*Minimal Power Loss: The solar cable provided is 12 AWG, please use large diameter wire to minimize power loss in your solar panel system.</li><li> -*IP68 waterproof rating can withstand extremely high and extremely low temperatures (-40°C to 95°C). Easy to maneuver. Insert the plug into the solar panel or inverter without cutting or removing the crimped terminals from the cable or plug. The locking design on both sides of the solar plug can prevent the plug from loosening and ensure safety.</li><li>-Safety Material: Environmentally friendly irradiated polyolefin plastic sheath + tinned copper conductor to ensure good electrical conductivity.</li ><li>- 100% TUV, CE, ROHS certified solar cable, made of top quality and durable.</li></ul> <p><strong>Features: </strong></p> <ul><li>- Solar panel cables are generally sold in 14, 12, and 10 AWG sizes. This solar panel cable is 12 AWG with a conductor diameter of 4 mm². An adapter cable is a set of two cables specifically designed to connect a solar panel to a solar charge controller.</li><li>- The adapter cable contains a connector on one end for easy connection to the solar panel and a bare wire on the other end that leads directly to the solar charge controller.</li><li>- This wiring kit is essential for stand-alone solar systems, whether roof-mounted or ground-mounted.</li>< li>- The cable is weather-resistant and designed for extreme heat and cold.</li></ul> <p><strong>Specification:</strong></p> <ul><li>Product Name: Solar Panel Extension Cable</li><li >Cable Length: 3m/10ft</li><li>Wire Cross Section: 4mm² (12 AWG)</li><li>Cable Conductor: Tinned Copper</li><li>Cable Insulation: Double XLPE</ li><li>Housing Material: PPO/PC</li><li>Contact Materials: Copper, silver plated.</li><li>Pin size: 4.0 mm.</li><li>Contact resistance: ≤0.5 mΩ.</ li><li>Rated voltage: DC 1.5 kV; AC 0.6-1kV.</li><li>Rated current: 10~50A.</li><li>Flame class: UL94-V0.</li><li>Insertion force: ≤ 50N.</li ><li>Retraction force: ≥50N.</li><li>Ambient temperature: -40 ° C ~ +95 ° C.</li><li>Upper limit of temperature: 100 ° C.</li><li>Waterproof: IP68.</li><li>Pollution degree: 2.</li><li>Protection class: DC class Ⅱ.</li><li >Standard: TÜV</li></ul> <p><strong>Package includes:</strong></p> <ul><li>1 x 3m black solar cable</li><li>1 x 3m red solar cable</li><li>1 x connector at the end of the black wire</li><li>1 plug on the end of the red wire</li></ul>